Beier USM-RC-2 Service Manual download pdf (Page 6)

D Sound module USM-RC-2

6 BEIER-Electronic 01.03.2012

Technical Data

Supply Voltage (U

): 5 – 14V DC

Power consumption: Standby-current: approx. 90mA

Operation (only sound): up to 3,0A

Operation (Sound + switching outputs):

Up to 6,0A

The current consumption depends on volume

and switched load.

Switching-inputs: 5 pieces

LO-Signal = U < 2V

HI-Signal = U > 5V

Integrated pull-up resistors (4k7 / 10k)

Switching-outputs: 12 pieces (npn – open collector),

Up to 1,5A for every output, the total current of

all outputs is not allowed to exceed 3,0A

Proportional-inputs: 4 pieces (1,000 - 2,000ms)

Proportional-outputs: 2 servo outputs (1,000 - 2,000ms)

Voltage inputs for drive speed for

analogue mode:

0 – 14V DC

Audio amplifier: Up to 2x20W (mono)

Recommended loudspeakers:

4 – 8Ω

Volume control: By external potentiometer (100kΩ) and/or

remote control possible

Memory for sound files: Micro-SD-card (1 to 8 GB)

Max. length for the sounds: Approx. 180 minutes per 1 GB

Unterstütze Sounddateien: WAV-Format, 8/16 Bit, Mono/Stereo, 22/44kHz

Sound output: 16 Bit, Mono, 44kHz

Number of possible sounds: • 5 running steps/gears (internally in up to

255 steps accelerated)

• 8 change sounds between the running

steps/gears

• Turn on noise, turn off noise, starting noise,

stopping noise, idling noise, brake noise,

reverse engine noise, curve squeal,

flashing lights sound

• 20 additional sounds (for example via prop.-

channels)

• 8 random sounds (random generator)

Random generator: Times between 1 to 250s adjustable

Interface: Universal Extension Interface

Permissible ambient temperature: 0 – 60°C

Permissible relative air humidity: max. 85%

Dimensions: 66 x 44 x 17 mm

Weight: 25g

1 2 3 4 5 6 7 8 9 10 11 ... 71 72

Comments to this Manuals

No comments

Beier USM-RC-2 Service Manual Page 6

Comments to this Manuals

Related products and manuals for Recording Equipment Beier USM-RC-2