brixlelektronik
...we got the solution
–bc-12er 12 channel receiver bc-20 plus 20 channel receiver
+/- 125% Connected device will be set to the programmed
position
0 Neutral signal will be provided (1.5ms)
Ausschaltwert Defines the position of the connected device during park
[switch off value] mode(choosing and connecting to new model with transmitter)
halten Current position will be held
[hold]
kein Sig. No servo signal send to the connected device
[no signal]
+/- 125% Connected device will be set to the programmed
position
0 Neutral signal will be provided (1.5ms)
Funkabrisswert Defines the position of the connected device when the signal is
[fail safe] lost or the transmitter is switched off
halten Current position will be held
[hold]
kein Sig. No servo signal send to the connected device
[no signal]
+/- 125% Connected device will be set to the programmed
position
0 Neutral signal will be provided (1.5ms)
Ebenenschalter A-z Defines the input device on the transmitter that
[Level control] enabled/controls the different levels
Ebenenestellung Defines on which level this output will work
[Level assignment] (use 3 position switch for proper control of the levels)
E+ 0+ A+ works on all levels
E- 0- A+ works just in the upper level(switch up)
E- 0+ A- works just in the mid level(sw. Mid position)
E+ 0- A- works just in the lower level (switch down)
Gegenläufig Nein Normal movement of connected device
[Reverse] [no]
Ja/Invers Reverse movement of connected device
[Yes/Reverse]
..+SigAus Signal will be switched of after 10 sec downtime
[..Signal off] (no change of position of input device)
Offset/Trim -125%..+125% Defines the offest of the connected device
Blindzone -95%..+95% Defines the dead zone around the neutral position.
[Dead zone]
23.06.14 Vxx417
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals